23 min read
To determine the carbon footprint of your packaging you will need to take each element of the pack, multiply the weight by your relevant emission factor, add your freight and end of life emissions. This will give you your total carbon footprint in terms of CO2e per pack, and your annual emissions. As packaging is usually a Scope 3 emission for most businesses in Malaysia, your carbon footprint will be dependent on the data your packaging manufacturer is able to provide. We produce rigid boxes, cardboard boxes, corrugated boxes and pulp mold inserts, all of which we can provide the specification data for.
Key Takeaways
- The carbon footprint of packaging is the greenhouse gas emissions associated with your packaging, measured in CO2e. This can be measured across the full life cycle or just part of it, for example cradle to gate.
- For most brands, the packaging you purchase from a manufacturer falls under Scope 3 emissions, as purchased goods and services. Disposing of your packaging falls under end of life treatment of sold products.
- IFRS S1 and S2 will be phased in within Malaysia's National Sustainability Reporting Framework from 2025. This means that Scope 3 emissions come into play at a later date, and it is likely that you will be asked to provide packaging data along your supply chain.
- The basic calculation is Activity Data × Emission Factor. For packaging, this involves the weight of each element of your packaging, freight distance and the electricity used for packaging.
- For electricity in Malaysia, you will need the grid factor provided by the Energy Commission. The provisional data for 2024 is 0.740 kg CO2e/kWh for Peninsular Malaysia, 0.539 for Sabah and 0.199 for Sarawak.
- The more specific the data from your suppliers, the more accurate your carbon footprint will be. To get a better calculation, you should consider providing us with the materials, weight, recycled content and finish of your packaging. If you use spend based calculations, this will only be a rough estimate.
- Consider which boundary and functional unit you want to use, and ensure that it is consistent when comparing different packs or years.
- We can provide you with the specification for your packaging including materials, weight, size and finish. We will then carry out your calculation and any verification.
Most brands will know the cost of their packaging, but far fewer will know the emissions it creates. More and more are being asked.
This guide is aimed at Malaysian brands, manufacturers and retailers looking to calculate the carbon footprint of their packaging. Whether it is requested by a customer, an investor or to meet your own sustainability goals, we will explain how packaging can fit into your Scope 1, 2 & 3 emissions, what is requested by Malaysia's reporting framework, the formula required, the data needed, which emission factors to use and what your packaging manufacturer can and cannot provide. We have been manufacturing packaging for over four decades, so the quicker you know the specification of your pack, the faster you can calculate.
01. What Is the Carbon Footprint of Packaging?
A carbon footprint is the sum of all greenhouse gases created from an activity or product, and it is measured in CO2e. This means greenhouse gases such as methane can be added to carbon dioxide to create a single scale. When referring to packaging, your carbon footprint includes the emissions created through sourcing the raw material, manufacturing the board or pulp, printing, converting, freight and end of life.
According to ISO 14067, a product carbon footprint is the sum of greenhouse gas emissions and removals throughout a product system, calculated using life cycle assessment. It can also be limited to certain stages of the life cycle, and many packaging figures begin this way. These are the people who will usually be asking for your figures.
| Who is asking | Why they want it | What they usually ask for |
|---|---|---|
| Customers on your list | They need to report value chain emissions according to the reporting framework in Malaysia, and your purchased packaging falls under this | How much packaging you use per annum, and data or a carbon footprint they can back up with a supplier |
| Export and retail buyers | They might ask about your materials and emissions in their questionnaires | A per pack figure and the method used |
| Your leadership | You will need a baseline to set any reduction targets | A method that can be used each year |
| Your packaging team | The weight, size and design affect both cost and emissions | A breakdown of results so you can compare designs |
Something to note from the GHG Protocol is that the Scope 3 Standard is intended to measure your own emissions over time. This means it is not intended to compare between companies. A carbon footprint is a management tool, so the method used is more important than the figure itself.
02. Where Does Packaging Fall Under Scope 1, Scope 2 and Scope 3?
The most popular accounting framework is the GHG Protocol, which categorises emissions into three scopes. Packaging can fall under all three, but for most brands it will be under Scope 3.
Direct emissions
Emissions from sources you own or control, such as your vehicles and any boilers or generators on site.
Packaging: Fuel from your own delivery vehicles transporting your packaged goods.
Purchased energy
Indirect emissions from purchased electricity, steam, heating and cooling.
Packaging: Electricity used on your packaging line, sealing and labelling machines and warehouse.
Value chain
All other indirect emissions from your supply chain and after the sale. Usually the largest portion.
Packaging: The packaging you purchase, freight and end of life.
As you are purchasing your packaging from a manufacturer, the energy and fuel they use in their own factory will be their Scope 1 and 2 emissions. This will then fall under your Scope 3. This means that the data your packaging manufacturer can provide will determine how accurate your figure can be. Within Scope 3, your packaging will fall under the following categories:

| Scope 3 category | What it means for packaging | Where the data sits |
|---|---|---|
| 1. Purchased goods and services | Emissions from making the packaging you buy | Your packaging manufacturer and its material suppliers |
| 4. Upstream transportation and distribution | Freight of packaging to you, and outbound freight that you pay for | Delivery notes and freight partners |
| 5. Waste generated in operations | Packaging waste at your site, such as damaged cartons and offcuts | Your waste records |
| 9. Downstream transportation and distribution | Outbound shipping of your packed product that you do not pay for | Logistics partners and customers |
| 12. End of life treatment of sold products | Disposal or recycling of the pack by your customers after use | Assumptions based on local collection and treatment |
Ensure there is no double counting within categories.
03. Which Malaysian Reporting Rules Require Packaging Data?
Malaysia's National Sustainability Reporting Framework (NSRF) was launched by the Advisory Committee on Sustainability Reporting, which is chaired by the Securities Commission Malaysia, on 24 September 2024. This follows the baseline standards of IFRS S1 and IFRS S2. Bursa Malaysia updated its Listing Requirements on 23 December 2024 to incorporate the NSRF. Companies will be required to comply over three phases.
| Group | Entities | IFRS S1 and S2 from |
|---|---|---|
| Group 1 | Main Market listed with RM2 billion or more market capitalisation | 2025 |
| Group 2 | Other Main Market listed | 2026 |
| Group 3 | ACE Market listed, or large non listed with RM2 billion or more revenue per annum | 2027 |
There will be a delay in reporting Scope 3. There is a grace period within the NSRF, so companies can choose not to report Scope 3. This means Scope 3 will not be reported until 2027 by Group 1 companies, and later within the other groups. When reporting Scope 3, it is expected that reasonable and verifiable data will be used, so a reasonably accurate starting point is to use data specific to the product together with sensible average values. However, your assumptions must be noted.
If your company is not part of any of these groups, you won't have any obligation to report, but you may be providing data for a company that is. This is likely to increase as customers look to calculate their Scope 3. The Securities Commission has developed the PACE Initiative to provide guidance, calculators and training, and medium and small sized companies are supported. Rules and dates can change, so please check the current status at sc.com.my/nsrf.
04. What Standards and Methods Apply to Packaging?
Most of the standards used for packaging sit within two families. The GHG Protocol is the most common standard used for corporate reporting, and ISO 14067 is the international standard at product level. Which one you follow will depend on what you are being asked to report.
| Standard | Description | Applicable to packaging |
|---|---|---|
| GHG Protocol Corporate Standard | Corporate inventory of Scope 1 and 2, with Scope 3 as optional | Your fuel and electricity usage during packing and distribution |
| GHG Protocol Scope 3 Standard | Corporate value chain emissions in 15 categories | If you are including purchased packaging, it will fall mostly within Category 1 |
| GHG Protocol Product Standard | Emissions from the life cycle of a specific product | Footprint of one product and its packaging |
| ISO 14064 | Principles and requirements for greenhouse gas inventories, including verification standards | If your corporate inventory requires verification |
| ISO 14067:2018 | Full or partial carbon footprint of a product using life cycle assessment | Per pack, for example cradle to gate |
Within the Scope 3 Standard, companies are required to report how much of the emissions in each category were calculated from data provided by suppliers or other value chain partners. This is a good reason to request actual specification data from your packaging manufacturer.
05. What Is the Formula for Calculating a Packaging Carbon Footprint?
All standard methods will use the same formula:
Activity data is a measured quantity, such as kilograms of board, kilowatt hours of electricity or tonne kilometres of freight. An emission factor is the kilograms of CO2e released for each unit of that activity. Multiply the two, add up the results, and you have the footprint. For packaging, these are the activities to calculate.
| Packaging activity | Activity data | Emission factor from |
|---|---|---|
| Making the materials | Kilograms of each material in the pack | Supplier data, industry data or an LCA database |
| Electricity at your site | Kilowatt hours used in packing and storage | The Energy Commission grid emission factor |
| Freight | Tonne kilometres, which is weight in tonnes multiplied by distance | A freight factor for the transport mode |
| End of life | Kilograms of packaging by disposal route | A waste treatment factor for each route |
Example 1: Electricity at a packaging site
A packaging site consumes 24,000 kWh of grid electricity per year. Using the indicative grid factor for 2024 of 0.740 kg CO2e/kWh, we can calculate the packaging site's Scope 2 emissions by multiplying these two figures together: 24,000 × 0.740 = 17,760 kg CO2e (or 17.76 tonnes).
Example 2: One pack (cradle to gate plus delivery)
Within this table, we have used generic round values to demonstrate the calculation. This example should not be used within any report. Instead, you will need to replace these factors with those provided by your supplier or a specific database.

| Item | Activity data | Generic factor | Total (kg CO2e) |
|---|---|---|---|
| Rigid box | 0.28 kg | 1.0 kg CO2e/kg | 0.280 |
| Molded pulp insert | 0.06 kg | 0.8 kg CO2e/kg | 0.048 |
| Corrugated cardboard | 0.12 kg | 0.9 kg CO2e/kg | 0.108 |
| Delivery to your site | 0.46 kg × 300 km = 0.138 tonne km | 0.1 kg CO2e/tonne km | 0.014 |
| Packaging per pack | 0.46 kg | 0.450 |
If you had 10,000 packs of this example, it would create around 4.5 tonnes of CO2e. The key thing here is to weigh each individual component, multiply by a specific named factor and then add on the delivery.
06. What Data Do You Need to Capture?
This will save you the most time. Ensure you have one standardised template with your purchasing, logistics and operations teams to capture the data. Ensure you know where the numbers have come from. This is what will go into your packaging calculation.

| Data | Where it comes from | Why it matters |
|---|---|---|
| Component list for each pack | Pack specification, artwork and prototype | A missing layer is a missing emission |
| Weight of each component | Your manufacturer's specification, or a scale on the prototype | Weight is the main driver of material emissions and freight |
| Material type and board specification | Supplier specification | Different materials have different factors |
| Recycled content and certification | Supplier certificates, such as FSC where it applies | Changes the factor and the claims you can make |
| Printing and finishes | Artwork specification | Coatings, foil and lamination add materials and process steps |
| Annual quantity for each design | Purchase orders | Turns a per pack figure into an annual total |
| Freight distance and mode | Delivery notes and freight partners | Air freight raises the freight share sharply |
| Wastage and returns | Your waste records and supplier records | Packaging bought but not used still carries emissions |
| End of life route | Your market and customer location | Collection and recycling differ from place to place |
Typical problems with emissions data include lack of consistency, incomplete factors and multiple owners. Having clear data standards, a uniform format and one owner will help overcome these issues.
07. What Emission Factors Should I Use for Packaging in Malaysia?
Emission factors need to come from a reliable source which is regularly updated. Also, if possible, factors should be specific to Malaysia and its energy mix. Where possible, try to use data in the following order:
| Priority and data type | Notes |
|---|---|
| 1. Supplier specific | Data measured or calculated for the exact product. This is ideal and is what you are asked to report on within the Scope 3 Standard |
| 2. Industry averages | Corrugated board data from Europe. This will be an average from another region, so it is important to state this |
| 3. LCA database | Data from recognised databases such as ecoinvent. Choose the factor closest to your material and region |
| 4. Spend based | Data based on emissions per ringgit. Only use this as a preliminary option, as it will change depending on price with no change in the material |
The FEFCO checklist for corrugated board suggests that data should be no older than five years, representative of the region and specific to the technology. They also mention that any data gaps should be reported and explained. This is good practice for any packaging material.
For electricity in Malaysia, use the grid emission factor provided by the Energy Commission (Suruhanjaya Tenaga). Malaysia has three separate grids, so use the one that serves your site.
| Grid | 2022 | 2023 | 2024 |
|---|---|---|---|
| Peninsular Malaysia | 0.769 | 0.760 | 0.740 |
| Sabah | 0.531 | 0.545 | 0.539 |
| Sarawak | 0.199 | 0.206 | 0.199 |
Figures are in kg CO2e per kWh, from the Energy Commission's Grid Emission Factor (GEF) in Malaysia, 2022 to 2024 (Provisional), published on 23 February 2026. They are provisional, so check for a later release before you finalise a report.
For paper and fibre materials, also keep fossil emissions and biogenic emissions separate, and report any removals on their own line. The FEFCO checklist asks for four separate figures, and ISO 14067 also sets rules for biogenic carbon. Do not net them off without saying so.
08. How Do You Calculate the Carbon Footprint of Packaging, Step by Step?
This is the sequence we suggest, whether you use a spreadsheet or specialist software.
Do the first pass with the data you already hold, and improve it later. The GHG Protocol itself recommends a phased approach in which the quality of the inventory improves over time.
09. Should You Use Cradle to Gate or Cradle to Grave?
The boundary decides which stages are counted, and it changes the result more than most other choices. Pick one before collecting data, and say which one you used.

| Boundary | What it includes | When it suits |
|---|---|---|
| Cradle to gate | Raw material extraction through to the factory gate, including mill and conversion | A figure for the purchased pack, which fits Scope 3 Category 1 |
| Cradle to gate plus delivery | The above, plus freight to your site | Packaging figures that also cover Category 4 |
| Cradle to grave | The above, plus filling, distribution, use and end of life | A full product footprint for a customer or label |
End of life is the stage with the most uncertainty. Whether a pack is actually collected and recycled depends on where it is sold, and collection rules differ from place to place, so check what is accepted in your market and state your assumption. For more on how we approach materials, see our sustainability page.
10. How Do Material and Design Choices Change the Result?
Once you have a baseline, the same calculation shows where a design change would make a difference. These are the levers that move a packaging footprint.
| Lever | How it changes the footprint | What to check |
|---|---|---|
| Weight | Less material per pack reduces emissions in making and in freight | Weigh the prototype, and test whether a lighter structure still protects the product |
| Material type | Board, corrugated and molded pulp each have different raw materials and processes | Compare on the same functional unit, not on weight alone |
| Recycled content | Changes the raw material emissions, and the accounting method affects how it is counted | State the method you used |
| Pack size and shape | Box size sets how many packs fit on a pallet or in a container | Right size the pack and remove spare space |
| Flat packed or made up | Boxes that ship flat take less space than boxes that arrive made up | Ask which structure suits your product |
| Printing and finishes | Coatings, lamination, foil and embossing add materials and process steps | Keep finishes that the design needs, and check their effect on recycling |
| Transport distance and mode | Air freight magnifies the effect of weight | Plan freight mode with packaging weight in mind |
No single material comes out lower in every case. In one life cycle study of cushioning systems, a heavier corrugated cardboard cushioning system had the highest carbon footprint once transport was included, which shows how weight, distance and mode interact. That is why we suggest comparing packs on the same footing, rather than assuming that one material is always better.
Changes are also cheaper to make early. A change to a molded pulp insert after the tooling is made means altering or remaking the tooling, so ask for a lighter or smaller structure to be prototyped before production. Our custom packaging manufacturing process explains the stages.
11. Which Tools Can You Use to Calculate a Packaging Carbon Footprint?
A guide from Wellkinetics describes a calculator as software or an online platform where you enter energy, transport and waste data, and it recommends a free tool as a starting point for smaller companies. Which tool suits you depends on whether you need a company inventory or a packaging footprint.
| Option | Good for | Limit to know about |
|---|---|---|
| A spreadsheet | One pack or a small range, with every number visible | You must find and record the emission factors yourself |
| A free SME calculator | Scope 1 and Scope 2 using Malaysian grid factors, such as the SEDG GHG calculator from Capital Markets Malaysia | That calculator covers Scope 1 and Scope 2 only, so it does not give a packaging footprint |
| PACE resources | Guidance and calculators for companies preparing NSRF reports | Built for reporting, not for modelling one pack |
| LCA software and databases | Detailed product footprints with documented factors | Cost, and the skill needed to use them well |
| A qualified consultant | Alignment with the GHG Protocol or ISO 14067, verification and NSRF reporting | Ask for the method statement and the factor sources |
A spreadsheet and the data in this guide are enough for a first estimate. Consider a consultant when the figure will be published, verified or used in a regulated report, because a documented method protects the number when someone asks how it was made.
12. What Can We Supply for Your Packaging Carbon Footprint?
We make rigid boxes, cardboard boxes, corrugated boxes and pulp mold inserts, so the whole pack can be described from one manufacturer. This is what we can provide to support your calculation.
- The component list: every layer of the pack, such as the insert, inner box and outer carton, so that none is missed.
- Materials and board specification: the material for each component as confirmed for your order.
- Weights: the weight of each component from the prototype, which you can check yourself.
- Dimensions and structure: the size and construction of each piece, so you can estimate freight and pallet loading.
- Molded pulp composition: our blend draws on bamboo, bagasse and recycled paper fibre, and the insert is formed in a wet press.
- Print and finish list: the coatings, foil, embossing or spot UV that apply to your artwork.
- Certification confirmation: we hold ISO 9001:2015 and ISO 14001:2015, and we confirm which materials on your order are FSC certified.
- Quantities and repeat plan: the quantity for each design, so the per pack figure can be scaled to an annual total.
We will then carry out your calculation and any verification. If you need a data point beyond this list, tell us at the specification stage so that we can say early what we can and cannot provide. Our custom packaging manufacturing process explains the stages we follow, and our guide to the molded pulp manufacturing process shows how a molded pulp part is made.
13. What Mistakes Make a Packaging Carbon Footprint Unreliable?
Most unreliable footprints have a recognisable cause, and most can be avoided at the start. This table shows the mistakes we would watch for.
| Mistake | Why it is a problem | How to avoid it |
|---|---|---|
| Leaving out a layer | Inserts, inner boxes, tape and labels add up, and a missing layer understates the result | List every component before you collect data |
| Mixing boundaries | A cradle to gate figure cannot be compared with a cradle to grave figure | State the boundary and keep it the same |
| Relying on spend only | A price change moves the result even when the pack has not changed | Use weights, and keep spend based figures for a first pass |
| Ignoring transport | Freight can be a large share, especially by air | Record distance, mode and weight |
| Using old or unrepresentative factors | The result may not reflect today's grid or your material | Use the latest published factors and record the year |
| Claiming recycling credit without evidence | End of life depends on local collection | State the assumption and check what your market accepts |
| Making comparative or neutral claims | Comparisons need the same function and a verified method, and offsetting is outside ISO 14067 | Avoid such claims unless they have been verified |
None of these needs advanced technical knowledge. They need a clear boundary, a complete component list and honest records.
14. How Do You Track Packaging Emissions Over Time?
A single calculation is a snapshot. The value comes from repeating it with the same method, so that changes in the figure reflect changes in the pack and not changes in the method. Fix a baseline year, then track these measures.
| Measure | How to track it | When to review |
|---|---|---|
| CO2e per pack | Recalculate from the component weights and factors | Every time the specification changes |
| Total packaging CO2e | Per pack figure multiplied by annual quantity | Every year, with your reporting cycle |
| Packaging weight per product | Total component weight for each product shipped | Each new design and each repeat order |
| Freight share | Tonne kilometres by mode for packaging deliveries | Each year, or when a route changes |
| Data quality | Share of the footprint based on supplier specific data | Each year, aiming to raise it |
In the short term, the practical steps are to right size packs, trim unneeded weight and remove spare layers, and to ask your suppliers for specification data once a year. In the longer term, plan packaging redesigns around the baseline, standardise formats where the product allows it, and build the calculation into your reporting cycle. Share the progress with your management and your customers, because a figure that is tracked and explained is far more useful than one that appears once.
15. Conclusion
Calculating the carbon footprint of packaging comes down to four decisions and one formula: choose the boundary, choose the unit, collect the weights and freight, and apply emission factors you can name and date. For most Malaysian brands the result sits in Scope 3, so its accuracy depends on the specification data from the packaging manufacturer. Start with the components you can weigh today, state your assumptions, and improve the figure each year. If you are planning a pack and want the specification data and calculation in one place, we would be glad to start with the prototype.
Need packaging data for your carbon footprint calculation?
Tell us the pack you are planning and the boundary you are working to, and we will confirm the materials, weights and finishes we can supply from the prototype stage.
Talk to Us About Packaging DataFAQs
How do you calculate the carbon footprint of packaging?
List every component of the pack, weigh each one, and multiply each weight by an emission factor for that material. Add the emissions from freight and, if your boundary includes it, end of life. Report the total in CO2e per pack and per year, and state the boundary, factors and assumptions you used.
What is the formula for a packaging carbon footprint?
Activity data multiplied by an emission factor gives emissions in CO2e. For packaging, activity data is mostly the weight of each material, the tonne kilometres of freight and the kilowatt hours of electricity used, and each one has its own emission factor.
Is packaging a Scope 1, 2 or 3 emission?
For most brands it is Scope 3. The packaging you buy falls under purchased goods and services, freight under upstream or downstream transportation, and disposal after use under end of life treatment of sold products. Your own fuel and electricity in packing operations are Scope 1 and Scope 2.
Which grid emission factor should I use for electricity in Malaysia?
Use the Energy Commission (Suruhanjaya Tenaga) grid emission factor for the grid you are connected to. The provisional 2024 figures are 0.740 kg CO2e per kWh for Peninsular Malaysia, 0.539 for Sabah and 0.199 for Sarawak. Check for a newer release before you finalise a report.
Do Malaysian companies have to report packaging emissions?
Packaging is not reported on its own, but it falls within Scope 3. Under the National Sustainability Reporting Framework, listed companies and large non listed companies with revenue of RM2 billion and above adopt IFRS S1 and S2 in phases from 2025, with Scope 3 disclosure following later. Smaller companies are not directly covered, but customers that are covered may ask them for data.
What data do I need from my packaging manufacturer?
You need the materials and board specification, the weight of each component, the dimensions and structure, any print and finishes, the fibre blend for molded pulp, the certifications that apply and the quantities ordered. We supply this specification data for the packs we make, so your calculation can be based on your actual pack.
Is molded pulp packaging lower carbon than other materials?
It depends on the pack. Weight, transport distance and mode, recycled content and end of life all change the result, so no material is lower carbon in every case. We do not claim a lower footprint for any pack until it has been calculated for that pack with a stated method.
Can you give me a carbon footprint figure for my packaging?
We provide the specification for your packaging, including materials, weight, size and finish, and we will then carry out your calculation and any verification. If you need data beyond this, tell us at the specification stage so we can say what we can provide.
Do I need a consultant to calculate my packaging carbon footprint?
Not always. A spreadsheet that uses specification data and published emission factors is enough for a first estimate. A qualified consultant is worth considering when you need a footprint aligned to ISO 14067, independent verification, or figures that feed into NSRF reporting.

