Percetakan Tenaga

Home » How to Calculate the Carbon Footprint of Packaging for Malaysian Businesses
carbon footprint

How to Calculate the Carbon Footprint of Packaging for Malaysian Businesses

How to Calculate the Carbon Footprint of Packaging for Malaysian Businesses

Table of Contents

23 min read

To determine the carbon footprint of your packaging you will need to take each element of the pack, multiply the weight by your relevant emission factor, add your freight and end of life emissions. This will give you your total carbon footprint in terms of CO2e per pack, and your annual emissions. As packaging is usually a Scope 3 emission for most businesses in Malaysia, your carbon footprint will be dependent on the data your packaging manufacturer is able to provide. We produce rigid boxes, cardboard boxes, corrugated boxes and pulp mold inserts, all of which we can provide the specification data for.

Key Takeaways

  • The carbon footprint of packaging is the greenhouse gas emissions associated with your packaging, measured in CO2e. This can be measured across the full life cycle or just part of it, for example cradle to gate.
  • For most brands, the packaging you purchase from a manufacturer falls under Scope 3 emissions, as purchased goods and services. Disposing of your packaging falls under end of life treatment of sold products.
  • IFRS S1 and S2 will be phased in within Malaysia's National Sustainability Reporting Framework from 2025. This means that Scope 3 emissions come into play at a later date, and it is likely that you will be asked to provide packaging data along your supply chain.
  • The basic calculation is Activity Data × Emission Factor. For packaging, this involves the weight of each element of your packaging, freight distance and the electricity used for packaging.
  • For electricity in Malaysia, you will need the grid factor provided by the Energy Commission. The provisional data for 2024 is 0.740 kg CO2e/kWh for Peninsular Malaysia, 0.539 for Sabah and 0.199 for Sarawak.
  • The more specific the data from your suppliers, the more accurate your carbon footprint will be. To get a better calculation, you should consider providing us with the materials, weight, recycled content and finish of your packaging. If you use spend based calculations, this will only be a rough estimate.
  • Consider which boundary and functional unit you want to use, and ensure that it is consistent when comparing different packs or years.
  • We can provide you with the specification for your packaging including materials, weight, size and finish. We will then carry out your calculation and any verification.

Most brands will know the cost of their packaging, but far fewer will know the emissions it creates. More and more are being asked.

This guide is aimed at Malaysian brands, manufacturers and retailers looking to calculate the carbon footprint of their packaging. Whether it is requested by a customer, an investor or to meet your own sustainability goals, we will explain how packaging can fit into your Scope 1, 2 & 3 emissions, what is requested by Malaysia's reporting framework, the formula required, the data needed, which emission factors to use and what your packaging manufacturer can and cannot provide. We have been manufacturing packaging for over four decades, so the quicker you know the specification of your pack, the faster you can calculate.

01. What Is the Carbon Footprint of Packaging?

A carbon footprint is the sum of all greenhouse gases created from an activity or product, and it is measured in CO2e. This means greenhouse gases such as methane can be added to carbon dioxide to create a single scale. When referring to packaging, your carbon footprint includes the emissions created through sourcing the raw material, manufacturing the board or pulp, printing, converting, freight and end of life.

According to ISO 14067, a product carbon footprint is the sum of greenhouse gas emissions and removals throughout a product system, calculated using life cycle assessment. It can also be limited to certain stages of the life cycle, and many packaging figures begin this way. These are the people who will usually be asking for your figures.

Who is askingWhy they want itWhat they usually ask for
Customers on your listThey need to report value chain emissions according to the reporting framework in Malaysia, and your purchased packaging falls under thisHow much packaging you use per annum, and data or a carbon footprint they can back up with a supplier
Export and retail buyersThey might ask about your materials and emissions in their questionnairesA per pack figure and the method used
Your leadershipYou will need a baseline to set any reduction targetsA method that can be used each year
Your packaging teamThe weight, size and design affect both cost and emissionsA breakdown of results so you can compare designs

Something to note from the GHG Protocol is that the Scope 3 Standard is intended to measure your own emissions over time. This means it is not intended to compare between companies. A carbon footprint is a management tool, so the method used is more important than the figure itself.

02. Where Does Packaging Fall Under Scope 1, Scope 2 and Scope 3?

The most popular accounting framework is the GHG Protocol, which categorises emissions into three scopes. Packaging can fall under all three, but for most brands it will be under Scope 3.

Scope 1

Direct emissions

Emissions from sources you own or control, such as your vehicles and any boilers or generators on site.

Packaging: Fuel from your own delivery vehicles transporting your packaged goods.

Scope 2

Purchased energy

Indirect emissions from purchased electricity, steam, heating and cooling.

Packaging: Electricity used on your packaging line, sealing and labelling machines and warehouse.

Scope 3

Value chain

All other indirect emissions from your supply chain and after the sale. Usually the largest portion.

Packaging: The packaging you purchase, freight and end of life.

As you are purchasing your packaging from a manufacturer, the energy and fuel they use in their own factory will be their Scope 1 and 2 emissions. This will then fall under your Scope 3. This means that the data your packaging manufacturer can provide will determine how accurate your figure can be. Within Scope 3, your packaging will fall under the following categories:

Illustration of the packaging journey from raw materials and the factory to freight, warehouse, delivery and recycling
Scope 3 categoryWhat it means for packagingWhere the data sits
1. Purchased goods and servicesEmissions from making the packaging you buyYour packaging manufacturer and its material suppliers
4. Upstream transportation and distributionFreight of packaging to you, and outbound freight that you pay forDelivery notes and freight partners
5. Waste generated in operationsPackaging waste at your site, such as damaged cartons and offcutsYour waste records
9. Downstream transportation and distributionOutbound shipping of your packed product that you do not pay forLogistics partners and customers
12. End of life treatment of sold productsDisposal or recycling of the pack by your customers after useAssumptions based on local collection and treatment

Ensure there is no double counting within categories.

03. Which Malaysian Reporting Rules Require Packaging Data?

Malaysia's National Sustainability Reporting Framework (NSRF) was launched by the Advisory Committee on Sustainability Reporting, which is chaired by the Securities Commission Malaysia, on 24 September 2024. This follows the baseline standards of IFRS S1 and IFRS S2. Bursa Malaysia updated its Listing Requirements on 23 December 2024 to incorporate the NSRF. Companies will be required to comply over three phases.

GroupEntitiesIFRS S1 and S2 from
Group 1Main Market listed with RM2 billion or more market capitalisation2025
Group 2Other Main Market listed2026
Group 3ACE Market listed, or large non listed with RM2 billion or more revenue per annum2027

There will be a delay in reporting Scope 3. There is a grace period within the NSRF, so companies can choose not to report Scope 3. This means Scope 3 will not be reported until 2027 by Group 1 companies, and later within the other groups. When reporting Scope 3, it is expected that reasonable and verifiable data will be used, so a reasonably accurate starting point is to use data specific to the product together with sensible average values. However, your assumptions must be noted.

If your company is not part of any of these groups, you won't have any obligation to report, but you may be providing data for a company that is. This is likely to increase as customers look to calculate their Scope 3. The Securities Commission has developed the PACE Initiative to provide guidance, calculators and training, and medium and small sized companies are supported. Rules and dates can change, so please check the current status at sc.com.my/nsrf.

04. What Standards and Methods Apply to Packaging?

Most of the standards used for packaging sit within two families. The GHG Protocol is the most common standard used for corporate reporting, and ISO 14067 is the international standard at product level. Which one you follow will depend on what you are being asked to report.

StandardDescriptionApplicable to packaging
GHG Protocol Corporate StandardCorporate inventory of Scope 1 and 2, with Scope 3 as optionalYour fuel and electricity usage during packing and distribution
GHG Protocol Scope 3 StandardCorporate value chain emissions in 15 categoriesIf you are including purchased packaging, it will fall mostly within Category 1
GHG Protocol Product StandardEmissions from the life cycle of a specific productFootprint of one product and its packaging
ISO 14064Principles and requirements for greenhouse gas inventories, including verification standardsIf your corporate inventory requires verification
ISO 14067:2018Full or partial carbon footprint of a product using life cycle assessmentPer pack, for example cradle to gate

Within the Scope 3 Standard, companies are required to report how much of the emissions in each category were calculated from data provided by suppliers or other value chain partners. This is a good reason to request actual specification data from your packaging manufacturer.

05. What Is the Formula for Calculating a Packaging Carbon Footprint?

All standard methods will use the same formula:

Activity×Emission factor=Emissions (CO2e)
Each activity should be calculated individually and then totalled up.

Activity data is a measured quantity, such as kilograms of board, kilowatt hours of electricity or tonne kilometres of freight. An emission factor is the kilograms of CO2e released for each unit of that activity. Multiply the two, add up the results, and you have the footprint. For packaging, these are the activities to calculate.

Packaging activityActivity dataEmission factor from
Making the materialsKilograms of each material in the packSupplier data, industry data or an LCA database
Electricity at your siteKilowatt hours used in packing and storageThe Energy Commission grid emission factor
FreightTonne kilometres, which is weight in tonnes multiplied by distanceA freight factor for the transport mode
End of lifeKilograms of packaging by disposal routeA waste treatment factor for each route

Example 1: Electricity at a packaging site

A packaging site consumes 24,000 kWh of grid electricity per year. Using the indicative grid factor for 2024 of 0.740 kg CO2e/kWh, we can calculate the packaging site's Scope 2 emissions by multiplying these two figures together: 24,000 × 0.740 = 17,760 kg CO2e (or 17.76 tonnes).

Example 2: One pack (cradle to gate plus delivery)

Note

Within this table, we have used generic round values to demonstrate the calculation. This example should not be used within any report. Instead, you will need to replace these factors with those provided by your supplier or a specific database.

Packaging components of one pack, a rigid box, molded pulp insert and corrugated carton, weighed on a scale
ItemActivity dataGeneric factorTotal (kg CO2e)
Rigid box0.28 kg1.0 kg CO2e/kg0.280
Molded pulp insert0.06 kg0.8 kg CO2e/kg0.048
Corrugated cardboard0.12 kg0.9 kg CO2e/kg0.108
Delivery to your site0.46 kg × 300 km = 0.138 tonne km0.1 kg CO2e/tonne km0.014
Packaging per pack0.46 kg0.450

If you had 10,000 packs of this example, it would create around 4.5 tonnes of CO2e. The key thing here is to weigh each individual component, multiply by a specific named factor and then add on the delivery.

06. What Data Do You Need to Capture?

This will save you the most time. Ensure you have one standardised template with your purchasing, logistics and operations teams to capture the data. Ensure you know where the numbers have come from. This is what will go into your packaging calculation.

Packaging specification data that PT Print supplies to support a packaging carbon footprint calculation
DataWhere it comes fromWhy it matters
Component list for each packPack specification, artwork and prototypeA missing layer is a missing emission
Weight of each componentYour manufacturer's specification, or a scale on the prototypeWeight is the main driver of material emissions and freight
Material type and board specificationSupplier specificationDifferent materials have different factors
Recycled content and certificationSupplier certificates, such as FSC where it appliesChanges the factor and the claims you can make
Printing and finishesArtwork specificationCoatings, foil and lamination add materials and process steps
Annual quantity for each designPurchase ordersTurns a per pack figure into an annual total
Freight distance and modeDelivery notes and freight partnersAir freight raises the freight share sharply
Wastage and returnsYour waste records and supplier recordsPackaging bought but not used still carries emissions
End of life routeYour market and customer locationCollection and recycling differ from place to place

Typical problems with emissions data include lack of consistency, incomplete factors and multiple owners. Having clear data standards, a uniform format and one owner will help overcome these issues.

07. What Emission Factors Should I Use for Packaging in Malaysia?

Emission factors need to come from a reliable source which is regularly updated. Also, if possible, factors should be specific to Malaysia and its energy mix. Where possible, try to use data in the following order:

Priority and data typeNotes
1. Supplier specificData measured or calculated for the exact product. This is ideal and is what you are asked to report on within the Scope 3 Standard
2. Industry averagesCorrugated board data from Europe. This will be an average from another region, so it is important to state this
3. LCA databaseData from recognised databases such as ecoinvent. Choose the factor closest to your material and region
4. Spend basedData based on emissions per ringgit. Only use this as a preliminary option, as it will change depending on price with no change in the material

The FEFCO checklist for corrugated board suggests that data should be no older than five years, representative of the region and specific to the technology. They also mention that any data gaps should be reported and explained. This is good practice for any packaging material.

For electricity in Malaysia, use the grid emission factor provided by the Energy Commission (Suruhanjaya Tenaga). Malaysia has three separate grids, so use the one that serves your site.

Grid202220232024
Peninsular Malaysia0.7690.7600.740
Sabah0.5310.5450.539
Sarawak0.1990.2060.199

Figures are in kg CO2e per kWh, from the Energy Commission's Grid Emission Factor (GEF) in Malaysia, 2022 to 2024 (Provisional), published on 23 February 2026. They are provisional, so check for a later release before you finalise a report.

For paper and fibre materials, also keep fossil emissions and biogenic emissions separate, and report any removals on their own line. The FEFCO checklist asks for four separate figures, and ISO 14067 also sets rules for biogenic carbon. Do not net them off without saying so.

08. How Do You Calculate the Carbon Footprint of Packaging, Step by Step?

This is the sequence we suggest, whether you use a spreadsheet or specialist software.

Set the goal and the boundary
Decide why you are calculating, such as a customer request, NSRF data or a design decision, and which life cycle stages you will include.
Choose the functional unit
Pick the unit the result is reported in, such as one pack, 1,000 packs or one product delivered. Keep it the same when you compare.
List every component
Include the outer carton, inner box, insert, tape, labels, inks and coatings, so that no layer is missed.
Collect the activity data
Gather weights, quantities, freight distances and electricity use from the records listed in the previous sections.
Apply the emission factors
Match each activity to a named factor, and record its source and year.
Total, document and review
Add the results by component and by stage, write down the assumptions, and review the figure every year or whenever the specification changes.

Do the first pass with the data you already hold, and improve it later. The GHG Protocol itself recommends a phased approach in which the quality of the inventory improves over time.

09. Should You Use Cradle to Gate or Cradle to Grave?

The boundary decides which stages are counted, and it changes the result more than most other choices. Pick one before collecting data, and say which one you used.

Illustration of a box journey from the factory gate through delivery to recycling, showing the cradle to gate and cradle to grave stages
BoundaryWhat it includesWhen it suits
Cradle to gateRaw material extraction through to the factory gate, including mill and conversionA figure for the purchased pack, which fits Scope 3 Category 1
Cradle to gate plus deliveryThe above, plus freight to your sitePackaging figures that also cover Category 4
Cradle to graveThe above, plus filling, distribution, use and end of lifeA full product footprint for a customer or label

End of life is the stage with the most uncertainty. Whether a pack is actually collected and recycled depends on where it is sold, and collection rules differ from place to place, so check what is accepted in your market and state your assumption. For more on how we approach materials, see our sustainability page.

10. How Do Material and Design Choices Change the Result?

Once you have a baseline, the same calculation shows where a design change would make a difference. These are the levers that move a packaging footprint.

LeverHow it changes the footprintWhat to check
WeightLess material per pack reduces emissions in making and in freightWeigh the prototype, and test whether a lighter structure still protects the product
Material typeBoard, corrugated and molded pulp each have different raw materials and processesCompare on the same functional unit, not on weight alone
Recycled contentChanges the raw material emissions, and the accounting method affects how it is countedState the method you used
Pack size and shapeBox size sets how many packs fit on a pallet or in a containerRight size the pack and remove spare space
Flat packed or made upBoxes that ship flat take less space than boxes that arrive made upAsk which structure suits your product
Printing and finishesCoatings, lamination, foil and embossing add materials and process stepsKeep finishes that the design needs, and check their effect on recycling
Transport distance and modeAir freight magnifies the effect of weightPlan freight mode with packaging weight in mind

No single material comes out lower in every case. In one life cycle study of cushioning systems, a heavier corrugated cardboard cushioning system had the highest carbon footprint once transport was included, which shows how weight, distance and mode interact. That is why we suggest comparing packs on the same footing, rather than assuming that one material is always better.

Changes are also cheaper to make early. A change to a molded pulp insert after the tooling is made means altering or remaking the tooling, so ask for a lighter or smaller structure to be prototyped before production. Our custom packaging manufacturing process explains the stages.

11. Which Tools Can You Use to Calculate a Packaging Carbon Footprint?

A guide from Wellkinetics describes a calculator as software or an online platform where you enter energy, transport and waste data, and it recommends a free tool as a starting point for smaller companies. Which tool suits you depends on whether you need a company inventory or a packaging footprint.

OptionGood forLimit to know about
A spreadsheetOne pack or a small range, with every number visibleYou must find and record the emission factors yourself
A free SME calculatorScope 1 and Scope 2 using Malaysian grid factors, such as the SEDG GHG calculator from Capital Markets MalaysiaThat calculator covers Scope 1 and Scope 2 only, so it does not give a packaging footprint
PACE resourcesGuidance and calculators for companies preparing NSRF reportsBuilt for reporting, not for modelling one pack
LCA software and databasesDetailed product footprints with documented factorsCost, and the skill needed to use them well
A qualified consultantAlignment with the GHG Protocol or ISO 14067, verification and NSRF reportingAsk for the method statement and the factor sources

A spreadsheet and the data in this guide are enough for a first estimate. Consider a consultant when the figure will be published, verified or used in a regulated report, because a documented method protects the number when someone asks how it was made.

12. What Can We Supply for Your Packaging Carbon Footprint?

We make rigid boxes, cardboard boxes, corrugated boxes and pulp mold inserts, so the whole pack can be described from one manufacturer. This is what we can provide to support your calculation.

  • The component list: every layer of the pack, such as the insert, inner box and outer carton, so that none is missed.
  • Materials and board specification: the material for each component as confirmed for your order.
  • Weights: the weight of each component from the prototype, which you can check yourself.
  • Dimensions and structure: the size and construction of each piece, so you can estimate freight and pallet loading.
  • Molded pulp composition: our blend draws on bamboo, bagasse and recycled paper fibre, and the insert is formed in a wet press.
  • Print and finish list: the coatings, foil, embossing or spot UV that apply to your artwork.
  • Certification confirmation: we hold ISO 9001:2015 and ISO 14001:2015, and we confirm which materials on your order are FSC certified.
  • Quantities and repeat plan: the quantity for each design, so the per pack figure can be scaled to an annual total.

We will then carry out your calculation and any verification. If you need a data point beyond this list, tell us at the specification stage so that we can say early what we can and cannot provide. Our custom packaging manufacturing process explains the stages we follow, and our guide to the molded pulp manufacturing process shows how a molded pulp part is made.

13. What Mistakes Make a Packaging Carbon Footprint Unreliable?

Most unreliable footprints have a recognisable cause, and most can be avoided at the start. This table shows the mistakes we would watch for.

MistakeWhy it is a problemHow to avoid it
Leaving out a layerInserts, inner boxes, tape and labels add up, and a missing layer understates the resultList every component before you collect data
Mixing boundariesA cradle to gate figure cannot be compared with a cradle to grave figureState the boundary and keep it the same
Relying on spend onlyA price change moves the result even when the pack has not changedUse weights, and keep spend based figures for a first pass
Ignoring transportFreight can be a large share, especially by airRecord distance, mode and weight
Using old or unrepresentative factorsThe result may not reflect today's grid or your materialUse the latest published factors and record the year
Claiming recycling credit without evidenceEnd of life depends on local collectionState the assumption and check what your market accepts
Making comparative or neutral claimsComparisons need the same function and a verified method, and offsetting is outside ISO 14067Avoid such claims unless they have been verified

None of these needs advanced technical knowledge. They need a clear boundary, a complete component list and honest records.

14. How Do You Track Packaging Emissions Over Time?

A single calculation is a snapshot. The value comes from repeating it with the same method, so that changes in the figure reflect changes in the pack and not changes in the method. Fix a baseline year, then track these measures.

MeasureHow to track itWhen to review
CO2e per packRecalculate from the component weights and factorsEvery time the specification changes
Total packaging CO2ePer pack figure multiplied by annual quantityEvery year, with your reporting cycle
Packaging weight per productTotal component weight for each product shippedEach new design and each repeat order
Freight shareTonne kilometres by mode for packaging deliveriesEach year, or when a route changes
Data qualityShare of the footprint based on supplier specific dataEach year, aiming to raise it

In the short term, the practical steps are to right size packs, trim unneeded weight and remove spare layers, and to ask your suppliers for specification data once a year. In the longer term, plan packaging redesigns around the baseline, standardise formats where the product allows it, and build the calculation into your reporting cycle. Share the progress with your management and your customers, because a figure that is tracked and explained is far more useful than one that appears once.

15. Conclusion

Calculating the carbon footprint of packaging comes down to four decisions and one formula: choose the boundary, choose the unit, collect the weights and freight, and apply emission factors you can name and date. For most Malaysian brands the result sits in Scope 3, so its accuracy depends on the specification data from the packaging manufacturer. Start with the components you can weigh today, state your assumptions, and improve the figure each year. If you are planning a pack and want the specification data and calculation in one place, we would be glad to start with the prototype.

Need packaging data for your carbon footprint calculation?

Tell us the pack you are planning and the boundary you are working to, and we will confirm the materials, weights and finishes we can supply from the prototype stage.

Talk to Us About Packaging Data

FAQs

How do you calculate the carbon footprint of packaging?

List every component of the pack, weigh each one, and multiply each weight by an emission factor for that material. Add the emissions from freight and, if your boundary includes it, end of life. Report the total in CO2e per pack and per year, and state the boundary, factors and assumptions you used.

What is the formula for a packaging carbon footprint?

Activity data multiplied by an emission factor gives emissions in CO2e. For packaging, activity data is mostly the weight of each material, the tonne kilometres of freight and the kilowatt hours of electricity used, and each one has its own emission factor.

Is packaging a Scope 1, 2 or 3 emission?

For most brands it is Scope 3. The packaging you buy falls under purchased goods and services, freight under upstream or downstream transportation, and disposal after use under end of life treatment of sold products. Your own fuel and electricity in packing operations are Scope 1 and Scope 2.

Which grid emission factor should I use for electricity in Malaysia?

Use the Energy Commission (Suruhanjaya Tenaga) grid emission factor for the grid you are connected to. The provisional 2024 figures are 0.740 kg CO2e per kWh for Peninsular Malaysia, 0.539 for Sabah and 0.199 for Sarawak. Check for a newer release before you finalise a report.

Do Malaysian companies have to report packaging emissions?

Packaging is not reported on its own, but it falls within Scope 3. Under the National Sustainability Reporting Framework, listed companies and large non listed companies with revenue of RM2 billion and above adopt IFRS S1 and S2 in phases from 2025, with Scope 3 disclosure following later. Smaller companies are not directly covered, but customers that are covered may ask them for data.

What data do I need from my packaging manufacturer?

You need the materials and board specification, the weight of each component, the dimensions and structure, any print and finishes, the fibre blend for molded pulp, the certifications that apply and the quantities ordered. We supply this specification data for the packs we make, so your calculation can be based on your actual pack.

Is molded pulp packaging lower carbon than other materials?

It depends on the pack. Weight, transport distance and mode, recycled content and end of life all change the result, so no material is lower carbon in every case. We do not claim a lower footprint for any pack until it has been calculated for that pack with a stated method.

Can you give me a carbon footprint figure for my packaging?

We provide the specification for your packaging, including materials, weight, size and finish, and we will then carry out your calculation and any verification. If you need data beyond this, tell us at the specification stage so we can say what we can provide.

Do I need a consultant to calculate my packaging carbon footprint?

Not always. A spreadsheet that uses specification data and published emission factors is enough for a first estimate. A qualified consultant is worth considering when you need a footprint aligned to ISO 14067, independent verification, or figures that feed into NSRF reporting.

Share this post

Author

Team PT Print

Team PT Print is a team of packaging specialists dedicated to helping businesses find practical and reliable packaging solutions. With experience across packaging design, printing, manufacturing, and product protection, the team shares insights to help businesses make better packaging decisions from choosing the right box style and materials to improving protection, presentation, and shipping performance.